Unable to add multiple listen rule keys or subscriptions to a Topic in an Azure Service Bus in an Azure Resource Group template

I recently ran across a problem wherein I was unable to add multiple Listen rules for my applications to my Topics in Azure Service Bus within an Azure Resource Group Template. I would run my template and it would fail to create the keys for the Topic or the Subscription for the topic of there was more than one of either of those for the Topic. It wouldn't even be consistent: it would switch back and forth between them between runs of the template. After a discussion with one of the Solution Architects at Microsoft, I found out there is, at the time of this writing, a bug in the Azure Resource Manager for Topics within Service Buses that prevents Topic access rules and subscriptions from being simultaneously created. As a work around, I was instructed to introduce an artificial dependency between each of the subscriptions to force the resource manager to create them serially rather than in parallel and this did the trick.

For example:

// TODO:

Troubleshooting the dreaded "The build directory of the test run either does not exist or access permission is required." error message in Microsoft Test Manager

Our company is starting to use the Microsoft Test Manager a lot more to manage our testing, both manual and automated. Additionally, we've recently started on creating some new Test Controllers and Test Agents with an exotic network configuration. On one of these new Test Controllers, I've started creating Lab test runs, and been getting the error message "The build directory of the test run either does not exist or access permission is required." When you Google this error message, you get what's described in this post on MSDN. In my case, this was the former problem: the account under which the test controller was running couldn't see the build folder.

After reading that last statement, you might say "well, why didn't you check to make sure that the drop folder was in the place it should have been ?". And, I did. Sort of. Due to our network configuration and aliases, my user could see it on the expected place at the alias in my portion of the network, but the user under which the Test Controller was running (not the tests themselves as configured in the Microsoft Test Manager, but instead the Test Controller software, they're not the same user) couldn't because we have some synchronization going on. Once I logged on to the machine on which the Test Controller service was running ** AS THE USER UNDER WHICH THE TEST CONTROLLER WAS RUNNING ** and went to the network alias myself, I could finally see that the synchronization between the locations on the network that had the same alias wasn't running and the build that I expected to be there was in fact not running.

Problem solved.

Regarding pre-test invocation scripts when deploying to a Test Agent with TFS

So, I learned something interesting about TFS Test Agents today and they way they handle pre-test invocation scripts when running tests on a Test Agent. In Microsoft Test Manager, do the following:

1. Connect to a Team Project
2. Change into 'Lab Center' mode
3. Click on 'Test Settings' in the top bar-ish area. This will open up the Test Settings Manager.
4. Edit or create a new 'Test Settings' item and open it up.
5. In the 'test settings' editor, under the 'Steps' column on the left-hand side, go to 'Advanced' -> 'Scripts'. You're now presented with the scripts page where you can specify scripts to be invoked before and after the execution of your test run.

Now, **here's the important thing** :

The script file(s) you specify in these boxes do not get copied to the Test Agent per se. Instead, their contents get read and merged with an automatically generated script that's created by the Test Agent. The script that actually gets run on the Test Agent will look similar to the following:

REM **************************************************************************** 

REM *  Generated by Microsoft Visual Studio 

REM *  Copyright (c) Microsoft Corporation. All rights reserved. 

REM *   

REM **************************************************************************** 

set ResultsDirectory=C:\Users\Autotest\AppData\Local\VSEQT\QTAgent\23620\00C4EF~1\Results 

set DeploymentDirectory=C:\Users\Autotest\AppData\Local\VSEQT\QTAgent\23620\00C4EF~1\DEPLOY~1 

set TestRunDirectory=C:\Users\Autotest\AppData\Local\VSEQT\QTAgent\23620\00C4EF~1 

set TestRunResultsDirectory=C:\Users\Autotest\AppData\Local\VSEQT\QTAgent\23620\00C4EF~1\Results\00C4EF~1 

set TotalAgents=1 

set AgentWeighting=100 

set AgentLoadDistributor=Microsoft.VisualStudio.TestTools.Execution.AgentLoadDistributor 

set AgentId=1 

set TestDir=C:\Users\Autotest\AppData\Local\VSEQT\QTAgent\23620\00C4EF~1 

set BuildDirectory=\\SOMESERVER\SomeShare\TFSDrops\HRST\CWSTAM~1.SPR\CWSTAM~3.1 

set DataCollectionEnvironmentContext=Microsoft.VisualStudio.TestTools.Execution.DataCollectionEnvironmentContext 

set TestLogsDir=C:\Users\Autotest\AppData\Local\VSEQT\QTAgent\23620\00C4EF~1\Results\00C4EF~1 

set ControllerName=TSTTFSTHR01:6901 

set TestDeploymentDir=C:\Users\Autotest\AppData\Local\VSEQT\QTAgent\23620\00C4EF~1\DEPLOY~1 

set AgentName=00C4EFD8-A65F-4B5E-AD5F-04F93895B543 

REM **************************************************************************** 

REM *  User Commands 

REM *   

REM **************************************************************************** 

echo "My actual user commands from my script file here"

This is important to keep in mind when you're writing the commands in the script to be executed, because no files get copied with the script file you reference in the Test Settings, and there's no mention of where that script file originally came from, so the script is effectively executed without any context except for that which is given to it by the TFS Test Agent in the prefixed lines.